More pictures for print 002, 003

diff --git a/3dprint/002/002_6.jpg b/3dprint/002/002_6.jpg
new file mode 100644 (file)
index 0000000..ed964a9
Binary files /dev/null and b/3dprint/002/002_6.jpg differ

diff --git a/3dprint/002/002_7.jpg b/3dprint/002/002_7.jpg
new file mode 100644 (file)
index 0000000..81a96be
Binary files /dev/null and b/3dprint/002/002_7.jpg differ

diff --git a/3dprint/002/002_8.jpg b/3dprint/002/002_8.jpg
new file mode 100644 (file)
index 0000000..999e1bb
Binary files /dev/null and b/3dprint/002/002_8.jpg differ

diff --git a/3dprint/003/003_1.jpg b/3dprint/003/003_1.jpg
new file mode 100644 (file)
index 0000000..100a2b5
Binary files /dev/null and b/3dprint/003/003_1.jpg differ

diff --git a/3dprint/003/003_2.jpg b/3dprint/003/003_2.jpg
new file mode 100644 (file)
index 0000000..a8b11ff
Binary files /dev/null and b/3dprint/003/003_2.jpg differ

diff --git a/3dprint/003/003_3.jpg b/3dprint/003/003_3.jpg
new file mode 100644 (file)
index 0000000..28fd049
Binary files /dev/null and b/3dprint/003/003_3.jpg differ

diff --git a/3dprint/prints.md b/3dprint/prints.md
index f23229c49fc13ebc2c1549eae04d9e485c608f8e..2a4b405dd4df067b881b50a164232875fe253b69 100644 (file)
--- a/3dprint/prints.md
+++ b/3dprint/prints.md
@@ -93,6 +93,9 @@ Material: "ELEGOO" PLA+ Neon Green
 ![](002/002_3.jpg)
 ![](002/002_4.jpg)
 ![](002/002_5.jpg)
+![](002/002_6.jpg)
+![](002/002_7.jpg)
+![](002/002_8.jpg)
 
 Settings (from [gcode](002/3dbenchy-topright_1h49m_0.20mm_210C_PLA_ENDER3.gcode)):
 
@@ -141,9 +144,11 @@ Print Quality: **TODO**
 Material: "ELEGOO" PLA+ Neon Green
 
 ![](001/003_1.jpg)
+![](001/003_2.jpg)
+![](001/003_3.jpg)
 
 Settings ([gcode](003/3dbenchy-topright_1h49m_0.20mm_210C_PLA_ENDER3-2.gcode)): See [print 002](#print-002)
 
 Issues:
 1. Knocked over print 002 almost immediately. Seems likely this was during homing. (No camera to monitor what happened yet.)
-3. **TODO**
\ No newline at end of file
+3. **TODO**