From 4fc54f15621da49c97dceefd0abee7fa3ec63352 Mon Sep 17 00:00:00 2001 From: Zachary Vance Date: Thu, 7 Nov 2024 21:25:52 -0500 Subject: [PATCH] Markdown --- archive/smart-curtains.md | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/archive/smart-curtains.md b/archive/smart-curtains.md index e846709..24be916 100644 --- a/archive/smart-curtains.md +++ b/archive/smart-curtains.md @@ -1,4 +1,6 @@ -How to set up IKEA Fyrtur curtains (with or without zigbee). +[za3k](/) > [archive](/archive/) > how to set up ikea fyrtur curtains + +These instructions work with or without zigbee. First, plug in the repeater, and put a battery in the remote. @@ -33,6 +35,7 @@ Sets the curtains to 28% of the way from the bottom (almost fully extended). These blinds came with 6 manuals. That's too many. Most of it is warnings and install instructions. Here's the stuff you'll need later: TRÅDFRI (remote) + - The remote takes a CR2032, which may not be included. - IKEA's operation mode for the remote requires the repeater to be present and plugged in. - Tap up/down to raise/lower the curtains all the way. @@ -40,9 +43,13 @@ TRÅDFRI (remote) - Opening the back, there is a pairing button. - Tap 4 times to perform a factory reset and enter zigbee pairing mode. - Hold for 10 seconds to pair with the repeater. Then repeat, holding for 10 seconds to pair with blinds. + TRÅDFRI (repeater) + - Insert a paperclip and hold 5 seconds to do a factory reset and enter zigbee pairing mode. + FYRTUR (blinds) + - Tap up/down to raise/lower the curtains all the way. - Tap up and down at the same time to enter IKEA pairing mode - Double-tap up to set the highest the curtain will go (minimum extension). Double-tap down to set the lowest the curtain will go (maximum extension). -- 2.47.3